品牌：ARISE恩睿斯
型号：S600S800
适用场所：工业
具体参数（物料重量、推力大小、行程）和详细价格请先咨询客服谢谢！咨询电话：13127754666
ERIVE驱动器
采用进口步进电机，精密磨制滚珠丝杠，终身免维护，可根据不同需求，配备不同的行程、安装方式、响应速度，自带左右限位开关，可在外部调节。
采用进口伺服电机，并配备1000线增量式编码器，在驱动速度加快的同时，精度得到了大大的提高。可以实时反馈丝杠位置，无需任何回中开关、限位开关，并且可以一键识别机械行程，精密磨制滚珠丝杠，终身免维护，可根据不同需求，配备不同的推力、行程、安装方式、响应素的。
Using imported stepping motor, precision grinding ball screw, liftime free maintenance, according to different needs, matching With different travel, installation and response speed, with the left and right switch, it can be adjusted outside.
With the imported servo motor and 1000 wire incremental encoder, the precision is greatly improved while the driving speed is quicker. Sure Real-time feedback screw position, withoutand back switch, limit switch, and can one key to identify mechanical stroke, preci-sion grinding ballscrew, Life free maintenance, according to differ-ent needs,equipped with different thrust, stroke, installation way,response speed.
CONTROLLER控制器
N180/N200
N180是一款操作简单、经济实用的纠偏控制器，采用32位双核处理器，能够确保精确和可靠的纠偏效果，能够满足一台500米/分钟的纠偏系统要求，将安装调试和售后的花费捡到最低。
N200是在N180纠偏的基础上增加了0-4A输出，可以直接驱动磁粉制动/离合器。控制模式支持手动、外部模拟量、锥度模式。
N180 is a simple, economical and practical correction controller that can ensure accu-rate and reliable correction. The effect can meet the requirement of a 500 merer/minute rectifying system and reduce the cost of installation and after sale. To the lowest.
N200 is an increase of 0-4A output on the basis of N180 correction, witch can directly drive the magnetic powder brake/clutch. The control mode supports manual, external analog, and taper mode.
S600是一款高性能伺服纠偏控制器，采用64位双核处理器，可以直接驱动带编码器的伺服电机，按键式操作简单，环形偏差显示更直观。
S600 is a high performance servo rectifying controller that can drive the band encoder directly. The servo motor, the key operation is simple, the ring deviation shows more intuitionistic.
S800
S800是一款高端纠偏控制器，采用64位四核处理器，直接驱动带编码器伺服电机，采用全触摸屏操作，八国语言显示，操作简单，使用方便。
S800 is a high-end deviation correction controller, witch derectly drives the servo motor with encoder, adopts full touch screen operation, displays in eight languages, and is easy to operate and use.
INFRARE红外线
A100是一款红外线纠偏传感器，可检测纸张、印刷膜、薄膜、无纺布、纱布、纱窗等材料的边缘，最适合带网孔的材料边缘检测，不可用于超透明材料检测。可在3万伏静电环境、大功率变频器干扰下正常使用。
A100 is an infrared correction sensor, which can be used to detect paper, printing film, film, non-woven fabric, gauze, screen window and other materials. The edge detection is the most suitable for material edge detection with mesh holes, which can not be used for ultra transparent material detection.
CCD影像传感器
AE400是一款CCD影像传感器，采用松下CCD传感器和镜头，64位双核CPU，采样时间0.1us，环境光线自适应，可跟踪各种材料的边缘、印刷图案的边缘，跟踪材料对比度变化，跟踪各种印刷线（连续线、断续线、双线）。实时彩色图像显示，全触摸操作更简便。
AE400 is an CCD image sensor, using an imported CCD sensor and lens, ambient light Adaptive, can track the edges of warious materials, the deges of the printed pattern, and track the contrast of the material. To track all kinds of printing lines (continuous line, intermittent line, double line). Real time color image display, whole Touch operation is more convenient.
ULTRASONIC超声波
A200是一款超声波纠偏传感器，采用富士高频超声波探头，可检测纸张、印刷材料、薄膜、透明及超透明材料等的边缘，可适应放卷、收卷、烘箱出口等环境，不可用于检测带网孔材料。可在3万伏静电环境、大功率变频器干扰下正常使用。
A200 is an ultrasonic deviation-correcting sensor, which adopts Fuji high-frequency jltra-sonic probe and can detect the edges of paper, printing materials, films, transparent and jl-tra-transparent materials, etc. It can adapt to unwinding, winding, oven outlet and other en-vironments, and cannot be used to detect materials with meshes. It can be used normally.
